banner_page

STM1061N23WX6F

3 Terminals 3-Pin STM1061 Voltage supervisor1 Channels Min 700mV Max 6V


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-STM1061N23WX6F
  • Package: TO-236-3, SC-59, SOT-23-3
  • Datasheet: PDF
  • Stock: 585
  • Description: 3 Terminals 3-Pin STM1061 Voltage supervisor1 Channels Min 700mV Max 6V (Kg)

Details

Tags

Parameters
Output Open Drain or Open Collector
Pin Count 3
Number of Channels 1
Max Supply Voltage 6V
Min Supply Voltage 700mV
Operating Supply Current 3.6μA
Power Dissipation 320mW
Max Supply Current 3.6μA
Adjustable Threshold NO
Watchdog Timer No
Reset Active Low
Voltage - Threshold 2.3V
Number of Voltages Monitored 1
Reset Timeout 30μs Typical Propagation Delay
Min Reset Threshold Voltage 2.254V
Max Reset Threshold Voltage 2.346V
Threshold Voltage +2.3V
Undervoltage Threshold 2.254V
Overvoltage Threshold 2.346V
Length 2.92mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-236-3, SC-59, SOT-23-3
Number of Pins 3
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Power Management Circuits
Max Power Dissipation 320mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.96mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number STM1061

STM1061N23WX6F Overview


There are 3 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 3 pins are located on this power management. 3 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a 3.6μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by STM1061. At most, voltage supervisor can operate at a supply temperature of 3.6μA.

STM1061N23WX6F Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current

STM1061N23WX6F Applications


There are a lot of STMicroelectronics STM1061N23WX6F Voltage Supervisors applications.

  • Functional modules
  • Power distribution systems of operating room
  • Insulation fault location system
  • Military electronics
  • Leakage current detection
  • Telecommunications equipment
  • Utility meter
  • Household appliances
  • Linux and server computing
  • Unattended substation automation

Write a review

Note: HTML is not translated!
    Bad           Good