STM1810LWX7F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM1810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Power Dissipation | 320mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | 4.62V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM1810LWX7F Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 3.6V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. A total of 3 pins are located on this power management. Pin count of the power management is 3. Supply voltage (Vsup) should be at least 1.2V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~105°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. It is estimated that the voltage supervisor's supply current is 16μA. A similar IC managements number of the manufacturer can always be found by using STM1810, the base power ics number. A maximum supply temperature of 16μA can be used with this power management.
STM1810LWX7F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
16μA operating supply current
STM1810LWX7F Applications
There are a lot of STMicroelectronics STM1810LWX7F Voltage Supervisors applications.
- Consumer electronics
- Power distribution systems of operating room
- Network equipment
- Smart meter
- Fire equipment power monitoring system
- Power distribution systems of infant care room
- Important electronics for automotive protection
- Microprocessor system
- Battery cars
- Battery cars
