STM1815TWX7F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM1815 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Power Dissipation | 320mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.06V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.98V |
| Max Reset Threshold Voltage | 3.15V |
| Threshold Voltage | 3.06V |
| Undervoltage Threshold | 2.98V |
| Overvoltage Threshold | 3.15V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM1815TWX7F Overview
There are 3 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 3.6V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 3 pins in it. 3 pins are on the supervisor. Supply voltage (Vsup) should be at least 1.2V for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~105°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 16μA. If you want to search for similar IC managements of this manufacturer, you can always refer to STM1815, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 16μA.
STM1815TWX7F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
16μA operating supply current
STM1815TWX7F Applications
There are a lot of STMicroelectronics STM1815TWX7F Voltage Supervisors applications.
- Battery-powered equipment
- Radar
- Power communication system
- WiFi router
- Radio
- Urban rail transit weak current power monitoring
- Rechargeable batteries
- Medical-specific insulation monitor
- Linux and server computing
- Set top box
