STM1816RWX7F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM1816 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 4μA |
| Nominal Supply Current | 16μA |
| Power Dissipation | 320mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.55V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.47V |
| Max Reset Threshold Voltage | 2.64V |
| Threshold Voltage | 2.55V |
| Undervoltage Threshold | 2.47V |
| Overvoltage Threshold | 2.64V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM1816RWX7F Overview
Power management is mounted through 3 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 3.6V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 3 pins in it. There are 3 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 4μA volt supply current. To find similar IC managements from the manufacturer, you can always search by STM1816. A maximum supply temperature of 16μA can be used with this power management.
STM1816RWX7F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
4μA operating supply current
STM1816RWX7F Applications
There are a lot of STMicroelectronics STM1816RWX7F Voltage Supervisors applications.
- Microprocessor system
- Medical-specific insulation monitor
- Consumer electronics
- Fire equipment power monitoring system
- Solar power charger
- Smart meter
- Transformer load monitoring equipment
- Battery cars
- Utility meter
- Network equipment
