STM1816SWX7F
| Parameters | |
|---|---|
| Pin Count | 3 |
| Max Output Current | 20mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 4μA |
| Nominal Supply Current | 16μA |
| Power Dissipation | 320mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.88V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.8V |
| Max Reset Threshold Voltage | 2.97V |
| Threshold Voltage | 2.88V |
| Undervoltage Threshold | 2.8V |
| Overvoltage Threshold | 2.97V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM1816 |
| Output | Open Drain or Open Collector |
STM1816SWX7F Overview
There are 3 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. Manage ics operate at 3.6V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. A total of 3 pins are located on this power management. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~105°C TA degrees. During operation, this power management system outputs Open Drain or Open Collector. The supervisor's supply current is specified to 4μA. A similar IC managements number of the manufacturer can always be found by using STM1816, the base power ics number. The power management can work with a maximum supply temperature of 16μA.
STM1816SWX7F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
4μA operating supply current
STM1816SWX7F Applications
There are a lot of STMicroelectronics STM1816SWX7F Voltage Supervisors applications.
- Dash board
- Network equipment
- Power distribution systems of CCU
- Military communications
- Consumer electronics
- Medical-specific insulation monitor
- Digitally controlled LDO regulators circuit
- Multi-voltage system
- Rechargeable batteries
- Functional modules
