STM32F051R6T6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 444mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | STM32F05 |
| Pin Count | 64 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, I2S, SPI, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 55 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0 |
| Peripherals | DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | HDMI-CEC, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 23.2mA |
| Bit Size | 32 |
| Data Converter | A/D 19x12b; D/A 1x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of ADC Channels | 19 |
| Number of SPI Channels | 1 |
| Height | 1.45mm |
| Length | 10.2mm |
| Width | 10.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F051R6T6 Overview
It is available in the 64-LQFP package for the benefit of saving space. This is mounted using the Surface Mount method. A package of Tray contains it. The device has a ARM? Cortex?-M0 core processor. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. There are 55 I/Os on the board. In order to find similar components, it has a base part number of STM32F05. The terminals of this device are located at QUAD. There are a total of 64 terminations in it. Part of the STM32F0 series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed with 64 pins. In total, it has 64 pins. It is one of the components included in Microcontrollers. Memory size for the devices is 32kB, which can be used to store programs and data. Its core architecture is based on ARM. It is important to note that the maximum supply current is 23.2mA. A 2.5/3.3V source of power is being used to run it. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. 8 timers/counters are in use. As part of the CORTEX-M0 CPU family, this component is included. In order to maintain normal operation, Vsup must be above 2V. An oscillator of type Internal is used.
STM32F051R6T6 Features
64-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
STM32F051R6T6 Applications
There are a lot of STMicroelectronics STM32F051R6T6 Microcontroller applications.
- Projectors
- Oil and gas
- Food and beverage
- Guidance-GPS
- Toys
- Paper shredders
- Fabric
- Tape drives
- Broadband technology, video and voice processing
- Electrocardiogram (EKG)
