STM32F071CBU7TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-UFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | STM32F0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STM32F07 |
| JESD-30 Code | S-XQCC-N48 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | HDMI, I2C, I2S, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 37 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.65V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0 |
| Peripherals | DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | HDMI-CEC, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 13x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 9 |
| ROM (words) | 131072 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 0.65mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
STM32F071CBU7TR Overview
For space savings, it is available in the 48-UFQFN Exposed Pad package. Surface Mount is used for mounting. A package of Tape & Reel (TR) contains it. ARM? Cortex?-M0 core processor is present on the device. During work, the temperature should remain at -40°C~105°C TA. It has a type of program memory of FLASH. There are 37 I/Os on it. A component with the same part number as STM32F07 can be compared to other similar components. The terminals of this device are set to QUAD. It consists of 48 terminationals. This electrical component is part of the STM32F0 series. Using the 3.3V supply voltage allows for high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. Data and programs can be stored on the devices with a memory size of 128kB. The architecture of its core is ARM. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. There are currently 9 timers/counters set up on the system. In order to maintain normal operation, Vsup must be above 2V. Internal is the oscillator type it uses.
STM32F071CBU7TR Features
48-UFQFN Exposed Pad package
Mounting type of Surface Mount
STM32F071CBU7TR Applications
There are a lot of STMicroelectronics STM32F071CBU7TR Microcontroller applications.
- Heater/Fan
- Vacuum cleaners
- Calculators
- Embedded gateways
- Broadband technology, video and voice processing
- Hard drives
- Playstation
- Scanners
- Automatic control
- Toys
