STM32F091RCT6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 342.689036mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 455mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STM32F09 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | CAN, I2C, I2S, IrDA, LIN, SPI, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0 |
| Peripherals | DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 30.3mA |
| Bit Size | 32 |
| Data Converter | A/D 19x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 10 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| CPU Family | CORTEX-M0 |
| Number of A/D Converters | 1 |
| Number of UART Channels | 8 |
| Number of ADC Channels | 19 |
| Max Junction Temperature (Tj) | 105°C |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 2 |
| Ambient Temperature Range High | 85°C |
| Height | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
STM32F091RCT6 Description
The STM32F091RTC6 microcontrollers have an ARM?Cortex?-M0 32-bit RISC processor running at up to 48 MHz, high-speed embedded memories (up to 256 Kbytes of Flash memory and 32 Kbytes of SRAM), and a comprehensive set of upgraded peripherals and I/Os. Two I2Cs, two SPIs/one I2S, one HDMI CEC, and up to eight USARTs are available, as well as one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven 16-bit timers, one 32-bit timer, and an advanced-control PWM timer. From a 2.0 to 3.6 V power supply, the STM32F091RTC6 microcontrollers operate in the -40 to +85 °C and -40 to +105 °C temperature ranges. Low-power applications can be designed thanks to a wide collection of power-saving options. Microcontrollers STM32F091RTC6 are available in a 64-LQFP package. The STM32F091RTC6 microcontrollers are suitable for a wide range of applications, including application control and user interfaces, hand-held equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.
STM32F091RCT6 Features
? Core: ARM? 32-bit Cortex?-M0 CPU,
frequency up to 48 MHz
? Memories
– 128 to 256 Kbytes of Flash memory
– 32 Kbytes of SRAM with HW parity
? CRC calculation unit
? Reset and power management
– Digital & I/Os supply: VDD = 2.0 V to 3.6 V
– Analog supply: VDDA = VDD to 3.6 V
– Power-on/Power down reset (POR/PDR)
– Programmable voltage detector (PVD)
– Low power modes: Sleep, Stop, Standby
– VBAT supply for RTC and backup registers
? Clock management
– 4 to 32 MHz crystal oscillator
– 32 kHz oscillator for RTC with calibration
– Internal 8 MHz RC with x6 PLL option
– Internal 40 kHz RC oscillator
– Internal 48 MHz oscillator with automatic
trimming based on ext. synchronization
? Up to 88 fast I/Os
– All mappable on external interrupt vectors
– Up to 69 I/Os with 5V-tolerant capability
and 19 with independent supply VDDIO2
? 12-channel DMA controller
? One 12-bit, 1.0 μs ADC (up to 16 channels)
– Conversion range: 0 to 3.6 V
– Separate analog supply: 2.4 V to 3.6 V
? One 12-bit D/A converter (with 2 channels)
? Two fast low-power analog comparators with
programmable input and output
? Up to 24 capacitive sensing channels for
touchkey, linear and rotary touch sensors
? Calendar RTC with alarm and periodic wakeup
from Stop/Standby
STM32F091RCT6 Applications
? PC peripherals
? Hand-held equipment
? Gaming and GPS platforms
? A/V receivers and digital TV
? Application control and user interfaces
The STM32F091RTC6 microcontrollers have an ARM?Cortex?-M0 32-bit RISC processor running at up to 48 MHz, high-speed embedded memories (up to 256 Kbytes of Flash memory and 32 Kbytes of SRAM), and a comprehensive set of upgraded peripherals and I/Os. Two I2Cs, two SPIs/one I2S, one HDMI CEC, and up to eight USARTs are available, as well as one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven 16-bit timers, one 32-bit timer, and an advanced-control PWM timer. From a 2.0 to 3.6 V power supply, the STM32F091RTC6 microcontrollers operate in the -40 to +85 °C and -40 to +105 °C temperature ranges. Low-power applications can be designed thanks to a wide collection of power-saving options. Microcontrollers STM32F091RTC6 are available in a 64-LQFP package. The STM32F091RTC6 microcontrollers are suitable for a wide range of applications, including application control and user interfaces, hand-held equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.
STM32F091RCT6 Features
? Core: ARM? 32-bit Cortex?-M0 CPU,
frequency up to 48 MHz
? Memories
– 128 to 256 Kbytes of Flash memory
– 32 Kbytes of SRAM with HW parity
? CRC calculation unit
? Reset and power management
– Digital & I/Os supply: VDD = 2.0 V to 3.6 V
– Analog supply: VDDA = VDD to 3.6 V
– Power-on/Power down reset (POR/PDR)
– Programmable voltage detector (PVD)
– Low power modes: Sleep, Stop, Standby
– VBAT supply for RTC and backup registers
? Clock management
– 4 to 32 MHz crystal oscillator
– 32 kHz oscillator for RTC with calibration
– Internal 8 MHz RC with x6 PLL option
– Internal 40 kHz RC oscillator
– Internal 48 MHz oscillator with automatic
trimming based on ext. synchronization
? Up to 88 fast I/Os
– All mappable on external interrupt vectors
– Up to 69 I/Os with 5V-tolerant capability
and 19 with independent supply VDDIO2
? 12-channel DMA controller
? One 12-bit, 1.0 μs ADC (up to 16 channels)
– Conversion range: 0 to 3.6 V
– Separate analog supply: 2.4 V to 3.6 V
? One 12-bit D/A converter (with 2 channels)
? Two fast low-power analog comparators with
programmable input and output
? Up to 24 capacitive sensing channels for
touchkey, linear and rotary touch sensors
? Calendar RTC with alarm and periodic wakeup
from Stop/Standby
STM32F091RCT6 Applications
? PC peripherals
? Hand-held equipment
? Gaming and GPS platforms
? A/V receivers and digital TV
? Application control and user interfaces
