STM32F101C6T6A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F1 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 363mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 36MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM32F101 |
| Pin Count | 48 |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 37 |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DMA, PDR, POR, PVD, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Address Bus Width | 32b |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 1.45mm |
| Length | 7mm |
| Width | 7.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F101C6T6A Description
The STM32F101C6T6A is a low-density access line STM32 F1 series 32-bit Microcontroller that includes a high-performance ARM Cortex-M3 RISC core running at 36MHz, high-speed embedded memories (Flash memory up to 32kB and SRAM up to 6KB), and a wide range of enhanced peripherals and I/Os connected to two APB buses. This device includes one 12-bit ADC, up to two general-purpose 16-bit timers, and conventional communication interfaces such as I2C, SPI, and two USARTs.
STM32F101C6T6A Features
Sleep, stop and standby modes
VBAT supply for RTC and backup registers
Serial wire debug (SWD) and JTAG interfaces
7-channel DMA Controller
2 x Watchdog timers (Independent and window)
SysTick Timer
96-bit Unique ID
36MHz Maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance
Single cycle multiplication and hardware division
Clock, reset and supply management
POR, PDR and programmable voltage detector (PVD)
4 to 16MHz Crystal oscillator
Internal 8MHz factory trimmed RC
Internal 40kHz RC
PLL for CPU clock
32kHz Oscillator for RTC with calibration
STM32F101C6T6A Applications
Automation & Process Control
Medical
Computers & Computer Peripherals
Communications & Networking
Industrial
Power Management
Consumer Electronics
Security
Imaging
Video & Vision
HVAC
