STM32F101VBT6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F1 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 434mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 36MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM32F101 |
| Pin Count | 100 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 80 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 32 |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DMA, PDR, POR, PVD, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 32b |
| Density | 1 Mb |
| Core Architecture | ARM |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 2 |
| Height | 1.45mm |
| Length | 14mm |
| Width | 14.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F101VBT6 Description
The high-performance ARM?Cortex?-M3 32-bit RISC core, operating at a 36 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 16 Kbytes), and a wide variety of enhanced peripherals and I/Os connected to two APB buses are all included in the STM32F101VBT6 medium-density access line. Each device includes three general-purpose 16-bit clocks, two I2Cs, two SPIs, and up to three USARTs as well as one 12-bit ADC. The STM32F101VBT6 medium-density access line family runs between a power supply of 2.0 and 3.6 V and a temperature range of -40 to +85 °C. The development of low-power applications is made possible by a wide range of power-saving modes.
The medium-density access line family STM32F101VBT6 consists of four distinct packages with a pin count ranging from 36 to 100. Different sets of peripherals are included depending on the device selected; the description that follows provides an overview of the whole spectrum of peripherals that are suggested for this family.
Due to these characteristics, the STM32F101VBT6 medium-density access line microcontroller family is appropriate for a variety of applications, including application control and user interface, medical and handheld devices, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVAC systems.
STM32F101VBT6 Features
CRC calculation unit, 96-bit unique ID
ECOPACK?packages
Debug mode
Serial wire debug (SWD) and JTAG interfaces
1 × 12-bit, 1 μs A/D converter (up to 16 channels)
Conversion range: 0 to 3.6 V
Temperature sensor
Up to 80 fast I/O ports
26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
STM32F101VBT6 Applications
Automotive
Personal electronics
Communications equipment
