STM32F103R8T7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Series | STM32F1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 444mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Frequency | 72MHz |
| Base Part Number | STM32F103 |
| Pin Count | 64 |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 51 |
| RAM Size | 20K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 50.3mA |
| Bit Size | 32 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Data Bus Width | 32b |
| Number of Timers/Counters | 4 |
| ROM (words) | 65536 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of ADC Channels | 16 |
| Number of I2C Channels | 2 |
| Height | 1.45mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F103R8T7 Overview
The package is 64-LQFP-shaped. In total, MCU chip has 51 inputs and outputs. The Mounting Type of the Microcontroller is Surface Mount. This Microcontroller is based on a core called 32-Bit. The type of program memory it uses is FLASH. There is a temperature range of -40°C~105°C TA for this Microcontroller. The electrical component that you are looking at belongs to the STM32F1 series of components. In the case of this Microcontroller, the memory size of the program is 64KB 64K x 8. ARM? Cortex?-M3 Core processors are used in MCU. During the manufacturing process, 64 terminations were applied to the IC chip. Microcontroller comes with 32 bit size. The part owns 64kB memory size. It is possible to find alternatives to the base part number STM32F103 Microcontroller by using the part number search tool. Using a 72MHz frequency, this electronic part can perform efficiently. The pin number of the component remains 64. It has 4 timers/counters. In total, Microcontroller chip has 64 pins. The MCU is powered by the the CORTEX-M3 CPU family that is embedded in it. In addition, it comes with a ARM core architecture. A total of 16 ADC channels are present in this device. There are 2 I2C channels included in the part, which has been designed for the purpose.
STM32F103R8T7 Features
STM32F1 series
Base part number of STM32F103
2 I2C channels
64 Terminals
Based on the 32-Bit
Comes with 64 Pins
STM32F103R8T7 Applications
There are a lot of STMicroelectronics STM32F103R8T7 Microcontroller applications. STM32F103R8T7 MCU is usually applied for Measurement and control field, Consumer electronics products, Network communication, mobile communication, Office automation equipment and computer peripherals, Industrial control Instrumentation and process control, Agriculture, transportation, Navigation control, Network application, Metering & measurement, Day to day life, Safety, Medical instruments and Automobile industry.
Automatic staplers
Graphic terminals
Routers
Electrocardiogram (EKG)
Hard drives
Calculators
Digital TVs
PDAs, game consoles
Tape drives
Smartphone
