STM32F103VBT6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F1 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 434mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 72MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM32F103 |
| Pin Count | 100 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 80 |
| RAM Size | 20K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 32 |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 50mA |
| Bit Size | 32 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 4 |
| Address Bus Width | 32b |
| Density | 1 Mb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 1 |
| Number of I2C Channels | 2 |
| Height | 1.45mm |
| Length | 14mm |
| Width | 14.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F103VBT6 Applications
Motor drive and application control
Medical and handheld equipment
PC peripherals gaming and GPS platforms
Industrial applications: PLC. inverters, printers. and scanners
Alarm systems,Video intercom,and HVAC
STM32F103VBT6 Description
The complete STM32F103xx high performance series includes 4 different package types: from 48 pins to 100 pins. Different groups of peripherals are included depending on the selected device. The following description outlines the complete range of peripherals recommended in the series
The STM32F103xx high performance line series operates in the temperature range from-40C to + 105C, from 2.0V to 3.6V power supply. A comprehensive power-saving mode allows the design of low-power applications
The STM32F103xx high-performance series integrates a high-performance ARM Cortex-M3 32-bit RISC core running at 72 MHz, high-speed embedded
memory (up to 128k bytes of flash memory and up to 20 < bvt for SRAM), and a variety of enhanced IGAMO and peripherals connected to two APB buses. All devices offer two 12-bit ADC. Three general purpose 16-bit timers plus a PWM timer, and standard and advanced communication interfaces: up to two l-Cs and SPI, three USARTSAN USB and one CAN.
?Core:ARM 32-bit CortexTM-M3 CPU
72 MHz, 90 DMIPS with 1.25 DMIPS/MHz - Single-cycle multiplication and hardware
division
-Nested interrupt controller with 43
maskable interrupt channels
-Interrupt processing (down to 6 CPU
cycles) with tail chaining
?Memories
- 32-to-128 Kbytes of Flash memory - 6-to-20 Kbytes of SRAM
?Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
POR, PDR, and programmable voltage detector (PVD)
4-to-16 MHz quartz oscillator
Internal 8 MHz factory-trimmed RC
Internal 32 kHz RC PLL for CPU clock
Dedicated 32 kHz oscillator for RTC with calibration
Low power
一 Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers12 x 12-bit, 1 us A/D converters (16-ch
Motor drive and application control
Medical and handheld equipment
PC peripherals gaming and GPS platforms
Industrial applications: PLC. inverters, printers. and scanners
Alarm systems,Video intercom,and HVAC
STM32F103VBT6 Description
The complete STM32F103xx high performance series includes 4 different package types: from 48 pins to 100 pins. Different groups of peripherals are included depending on the selected device. The following description outlines the complete range of peripherals recommended in the series
The STM32F103xx high performance line series operates in the temperature range from-40C to + 105C, from 2.0V to 3.6V power supply. A comprehensive power-saving mode allows the design of low-power applications
The STM32F103xx high-performance series integrates a high-performance ARM Cortex-M3 32-bit RISC core running at 72 MHz, high-speed embedded
memory (up to 128k bytes of flash memory and up to 20 < bvt for SRAM), and a variety of enhanced IGAMO and peripherals connected to two APB buses. All devices offer two 12-bit ADC. Three general purpose 16-bit timers plus a PWM timer, and standard and advanced communication interfaces: up to two l-Cs and SPI, three USARTSAN USB and one CAN.
?Core:ARM 32-bit CortexTM-M3 CPU
72 MHz, 90 DMIPS with 1.25 DMIPS/MHz - Single-cycle multiplication and hardware
division
-Nested interrupt controller with 43
maskable interrupt channels
-Interrupt processing (down to 6 CPU
cycles) with tail chaining
?Memories
- 32-to-128 Kbytes of Flash memory - 6-to-20 Kbytes of SRAM
?Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
POR, PDR, and programmable voltage detector (PVD)
4-to-16 MHz quartz oscillator
Internal 8 MHz factory-trimmed RC
Internal 32 kHz RC PLL for CPU clock
Dedicated 32 kHz oscillator for RTC with calibration
Low power
一 Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers12 x 12-bit, 1 us A/D converters (16-ch
