Parameters | |
---|---|
Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB |
Supply Current-Max | 70mA |
Bit Size | 32 |
Data Converter | A/D 21x12b; D/A 2x12b |
Watchdog Timer | Yes |
Has ADC | YES |
DMA Channels | YES |
Data Bus Width | 32b |
PWM Channels | YES |
Number of Timers/Counters | 8 |
Core Architecture | ARM |
Number of ADC Channels | 21 |
Number of I2C Channels | 2 |
Number of SPI Channels | 3 |
Height | 1.45mm |
Length | 20.2mm |
Width | 20.2mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
Mounting Type | Surface Mount |
Package / Case | 144-LQFP |
Surface Mount | YES |
Number of Pins | 144 |
Operating Temperature | -40°C~105°C TA |
Packaging | Tray |
Series | STM32F1 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 144 |
Subcategory | Microcontrollers |
Max Power Dissipation | 666mW |
Technology | CMOS |
Terminal Position | QUAD |
Terminal Form | GULL WING |
Supply Voltage | 3.3V |
Terminal Pitch | 0.5mm |
Frequency | 72MHz |
Base Part Number | STM32F103 |
Pin Count | 144 |
Supply Voltage-Min (Vsup) | 2V |
Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
Memory Size | 256kB |
Oscillator Type | Internal |
Number of I/O | 112 |
RAM Size | 48K x 8 |
Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
Core Processor | ARM® Cortex®-M3 |
Peripherals | DMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDT |
Program Memory Type | FLASH |
Core Size | 32-Bit |
Program Memory Size | 256KB 256K x 8 |
The STM32F103ZCT7 features a high-performance ARM Cortex-M3 32-bit RISC CPU running at a frequency of 72 MHz, high-speed embedded storage (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and a wide variety of upgraded I/Os and peripherals connected to two APB buses. Each device includes three 12-bit ADCs, four general-purpose 16-bit timers, two PWM timers, up to two I2Cs, three SPIs, two I2Ss, one SDIO, and five USARTs, a USB port, and a CAN interface. The STM32F103ZCT7 high-density performance line operates between a power supply of 2.0 and 3.6 V and a temperature range of -40 to +105 °C. The development of low-power applications is made possible by a wide range of power-saving modes. Because of these characteristics, the STM32F103ZCT7 high-density performance line microcontroller is appropriate for a variety of applications, including motor drives, application control, medical and handheld devices, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercom, and HVAC.
Debug mode
SDIO interface
Up to 11 timers
ECOPACK? packages
Up to 112 fast I/O ports
2 × 12-bit D/A converters
CAN interface (2.0B Active)
USB 2.0 full speed interface
DMA: 12-channel DMA controller
SysTick timer: a 24-bit downcounter
Up to 13 communication interfaces
CRC calculation unit, 96-bit unique ID
2 × 16-bit basic timers to drive the DAC
Up to 2 × I2C interfaces (SMBus/PMBus)
Serial wire debug (SWD) & JTAG interfaces
Cortex? -M3 Embedded Trace Macrocell?
2 × watchdog timers (Independent and Window)
Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed
72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1)
Flexible static memory controller with 4 Chip Select. Supports Compact
Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
Enterprise systems
Personal electronics
Communications equipment