STM32F103ZET6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F1 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 666mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 72MHz |
| Base Part Number | STM32F103 |
| Pin Count | 144 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | CAN, I2C, I2S, IrDA, LIN, SDIO, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 112 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 32 |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 70mA |
| Bit Size | 32 |
| Data Converter | A/D 21x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 8 |
| Density | 4 Mb |
| Core Architecture | ARM |
| Number of ADC Channels | 21 |
| Number of PWM Channels | 16 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 3 |
| Height | 1.45mm |
| Length | 20mm |
| Width | 20.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F103ZET6 Description
The STM32F103ZET6 has a high-performance ARM? Cortex?-M3 32-bit RISC CPU running at 72 MHz, high-speed embedded storage (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and a large number of upgraded I/Os and peripherals connected to two APB buses. Three 12-bit ADCs, four general-purpose 16-bit timers, and two PWM timers are included in the STM32F103ZET6 microcontroller, as well as standard and advanced communication interfaces such as up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, a USB, and a CAN. The STM32F103xC/D/E high-density performance line family operates from a 2.0 to 3.6 V power source and operates in the temperature range of –40 to +105 °C. Low-power applications can be designed thanks to a wide collection of power-saving modes.
STM32F103ZET6 Features
Core: ARM? 32-bit Cortex?-M3 CPU
72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
Single-cycle multiplication and hardware division
Memories
256 to 512 Kbytes of Flash memory
up to 64 Kbytes of SRAM
Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
LCD parallel interface, 8080/6800 modes
Clock, reset, and supply management
2.0 to 3.6 V application supply and I/Os
POR, PDR, and programmable voltage detector (PVD)
4-to-16 MHz crystal oscillator
Internal 8 MHz factory-trimmed RC
Internal 40 kHz RC with calibration
32 kHz oscillator for RTC with calibration
Low power
Sleep, Stop and Standby modes
VBAT supply for RTC and backup registers
3 × 12-bit, 1 μs A/D converters (up to 21 channels)
Conversion range: 0 to 3.6 V
Triple-sample and hold capability
Temperature sensor
2 × 12-bit D/A converters
DMA: 12-channel DMA controller
Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
Debug mode
Serial wire debug (SWD) & JTAG interfaces
Cortex?-M3 Embedded Trace Macrocell?
Up to 112 fast I/O ports
51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
Up to 11 timers
Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
2 × watchdog timers (Independent and Window)
SysTick timer: a 24-bit down counter
2 × 16-bit basic timers to drive the DAC
Up to 13 communication interfaces
Up to 2 × I2C interfaces (SMBus/PMBus)
Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed
CAN interface (2.0B Active)
USB 2.0 full speed interface
SDIO interface
CRC calculation unit, 96-bit unique ID
ECOPACK? packages
STM32F103ZET6 Applications
Data Acquisition
Low-cost Sensor integration
Low power Embedded devices
Small data retention related purposes
