banner_page

STM32F107VCT6

256KB 256K x 8 FLASH ARM? Cortex?-M3 32-Bit Microcontroller STM32F1 Series STM32F107 100 Pin 72MHz 3.3V 100-LQFP


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-STM32F107VCT6
  • Package: 100-LQFP
  • Datasheet: PDF
  • Stock: 178
  • Description: 256KB 256K x 8 FLASH ARM? Cortex?-M3 32-Bit Microcontroller STM32F1 Series STM32F107 100 Pin 72MHz 3.3V 100-LQFP (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 months ago)
Mounting Type Surface Mount
Package / Case 100-LQFP
Surface Mount YES
Number of Pins 100
Operating Temperature -40°C~85°C TA
Packaging Tray
Series STM32F1
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
Termination SMD/SMT
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Microcontrollers
Max Power Dissipation 434mW
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 72MHz
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number STM32F107
Pin Count 100
Supply Voltage-Min (Vsup) 2V
Interface CAN, Ethernet, I2C, I2S, IrDA, LIN, SPI, UART, USART, USB
Memory Size 256kB
Oscillator Type Internal
Number of I/O 80
RAM Size 64K x 8
Voltage - Supply (Vcc/Vdd) 2V~3.6V
uPs/uCs/Peripheral ICs Type MICROCONTROLLER, RISC
Core Processor ARM® Cortex®-M3
Peripherals DMA, POR, PWM, Voltage Detect, WDT
Program Memory Type FLASH
Core Size 32-Bit
Program Memory Size 256KB 256K x 8
Connectivity CANbus, Ethernet, I2C, IrDA, LINbus, SPI, UART/USART, USB OTG
Supply Current-Max 68mA
Bit Size 32
Data Converter A/D 16x12b; D/A 2x12b
Watchdog Timer Yes
Has ADC YES
DMA Channels YES
Data Bus Width 32b
PWM Channels YES
Number of Timers/Counters 7
Address Bus Width 32b
Density 2 Mb
Core Architecture ARM
Number of ADC Channels 16
Number of SPI Channels 3
Number of Ethernet Channels 1
Height 1.45mm
Length 14mm
Width 14.2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

STM32F107VCT6 Description


The STM32F107VCT6 from the STM32F103xC, STM32F103xD, and STM32F103xE performance line family includes a high-performance ARM Cortex -M3 32-bit RISC core operating at 72 MHz, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and a wide range of enhanced I/Os and peripherals connected to two APB buses. All devices have three 12-bit ADCs, four general-purpose 16-bit timers, and two PWM timers, as well as standard and sophisticated communication interfaces, including up to two I2Cs, three SPIs, and two I2Ss, one SDIO, five USARTs, a USB, and a CAN.



STM32F107VCT6 Features


  • Core: ARM? 32-bit Cortex? -M3 CPU

  • 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access

  • Single-cycle multiplication and hardware division

  • Memories

  • 256 to 512 Kbytes of Flash memory

  • up to 64 Kbytes of SRAM

  • Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories

  • LCD parallel interface, 8080/6800 modes

  • Clock, reset and supply management

  • 2.0 to 3.6 V application supply and I/Os

  • POR, PDR, and programmable voltage detector (PVD)

  • 4-to-16 MHz crystal oscillator

  • Internal 8 MHz factory-trimmed RC

  • Internal 40 kHz RC with calibration

  • 32 kHz oscillator for RTC with calibration

  • Low power

  • Sleep, Stop and Standby modes

  • VBATsupply for RTC and backup registers

  • 3 × 12-bit, 1 μs A/D converters (up to 21 channels)

  • Conversion range: 0 to 3.6 V

  • Triple-sample and hold capability

  • Temperature sensor

  • 2 × 12-bit D/A converters

  • DMA: 12-channel DMA controller

  • Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs

  • Debug mode

  • Serial wire debug (SWD) & JTAG interfaces

  • Cortex? -M3 Embedded Trace Macrocell?

  • Up to 112 fast I/O ports

  • 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

  • Up to 11 timers

  • Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

  • 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop

  • 2 × watchdog timers (Independent and Window)

  • SysTick timer: a 24-bit down counter

  • 2 × 16-bit basic timers to drive the DAC

  • Up to 13 communication interfaces

  • Up to 2 × I2C interfaces (SMBus/PMBus)

  • Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)

  • Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed

  • CAN interface (2.0B Active)

  • USB 2.0 full speed interface

  • SDIO interface

  • CRC calculation unit, 96-bit unique ID

  • ECOPACK? packages



STM32F107VCT6 Applications


  • Industrial, automotive and other high-end applications


Write a review

Note: HTML is not translated!
    Bad           Good