banner_page

STM32F205ZGT6TR

1MB 1M x 8 FLASH ARM? Cortex?-M3 32-Bit Microcontroller STM32F2 Series STM32F205 144 Pin 120MHz 144-LQFP


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-STM32F205ZGT6TR
  • Package: 144-LQFP
  • Datasheet: PDF
  • Stock: 327
  • Description: 1MB 1M x 8 FLASH ARM? Cortex?-M3 32-Bit Microcontroller STM32F2 Series STM32F205 144 Pin 120MHz 144-LQFP (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 months ago)
Mounting Type Surface Mount
Package / Case 144-LQFP
Surface Mount YES
Number of Pins 144
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Series STM32F2
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 144
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 500mW
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Terminal Pitch 0.5mm
Frequency 120MHz
Base Part Number STM32F205
Pin Count 144
Supply Voltage-Min (Vsup) 1.8V
Interface CAN, I2C, I2S, IrDA, LIN, MMC, SPI, UART, USART, USB
Memory Size 1MB
Oscillator Type Internal
Number of I/O 114
RAM Size 132K x 8
Voltage - Supply (Vcc/Vdd) 1.8V~3.6V
uPs/uCs/Peripheral ICs Type MICROCONTROLLER, RISC
Core Processor ARM® Cortex®-M3
Peripherals Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT
Program Memory Type FLASH
Core Size 32-Bit
Program Memory Size 1MB 1M x 8
Connectivity CANbus, I2C, IrDA, LINbus, MMC, SPI, UART/USART, USB OTG
Bit Size 32
Data Converter A/D 24x12b; D/A 2x12b
Watchdog Timer Yes
Has ADC YES
DMA Channels YES
Data Bus Width 32b
Number of Timers/Counters 14
Core Architecture ARM
Low Power Mode YES
Number of UART Channels 2
Number of ADC Channels 24
Number of Serial I/Os 6
Number of PWM Channels 6
Number of I2C Channels 3
Height 1.45mm
Length 20.2mm
Width 20.2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

STM32F205ZGT6TR              Description

 

The STM32F20x family is based on the high-performance Arm? Cortex?-M3 32-bit RISC core operating at a frequency of up to 120 MHz. The family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix. The devices also feature an adaptive real-time memory accelerator (ART Accelerator?) that allows to achieve a performance equivalent to 0 wait state program execution from Flash memory at a CPU frequency up to 120 MHz. This performance has been validated using the CoreMark? benchmark.

 

STM32F205ZGT6TR                   Features

· Core: Arm? 32-bit Cortex?-M3 CPU (120 MHz

max) with Adaptive real-time accelerator (ART

Accelerator?) allowing 0-wait state execution

performance from Flash memory, MPU,

150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)

· Memories

– Up to 1 Mbyte of Flash memory

– 512 bytes of OTP memory

– Up to 128 + 4 Kbytes of SRAM

– Flexible static memory controller that

supports Compact Flash, SRAM, PSRAM,

NOR and NAND memories

– LCD parallel interface, 8080/6800 modes

· Clock, reset and supply management

– From 1.8 to 3.6 V application supply + I/Os

– POR, PDR, PVD and BOR

– 4 to 26 MHz crystal oscillator

– Internal 16 MHz factory-trimmed RC

– 32 kHz oscillator for RTC with calibration

– Internal 32 kHz RC with calibration

· Low-power modes

– Sleep, Stop and Standby modes

– VBAT supply for RTC, 20 × 32 bit backup

registers, and optional 4 Kbytes backup

SRAM

· 3 × 12-bit, 0.5 μs ADCs with up to 24 channels

and up to 6 MSPS in triple interleaved mode

· 2 × 12-bit D/A converters

· General-purpose DMA: 16-stream controller

with centralized FIFOs and burst support

· Up to 17 timers

– Up to twelve 16-bit and two 32-bit timers,

up to 120 MHz, each with up to four

IC/OC/PWM or pulse counter and

quadrature (incremental) encoder input

· Debug mode: Serial wire debug (SWD), JTAG,

and Cortex?-M3 Embedded Trace Macrocell?

 

STM32F205ZGT6TR            Applications

 Motor drive and application control

· Medical equipment

· Industrial applications: PLC, inverters, circuit breakers

· Printers, and scanners

· Alarm systems, video intercom, and HVAC

· Home audio appliances

 


Write a review

Note: HTML is not translated!
    Bad           Good