Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
Mounting Type |
Surface Mount |
Package / Case |
144-LQFP |
Surface Mount |
YES |
Number of Pins |
144 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tray |
Series |
STM32F2 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
144 |
ECCN Code |
3A991.A.2 |
Subcategory |
Microcontrollers |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Frequency |
120MHz |
Base Part Number |
STM32F205 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2/3.3V |
Supply Voltage-Min (Vsup) |
1.8V |
Interface |
CAN, I2C, I2S, IrDA, LIN, MMC, SPI, UART, USART, USB |
Memory Size |
1MB |
Oscillator Type |
Internal |
Number of I/O |
114 |
RAM Size |
132K x 8 |
Voltage - Supply (Vcc/Vdd) |
1.8V~3.6V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER, RISC |
Core Processor |
ARM® Cortex®-M3 |
Peripherals |
Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
Program Memory Type |
FLASH |
Core Size |
32-Bit |
Program Memory Size |
1MB 1M x 8 |
Connectivity |
CANbus, I2C, IrDA, LINbus, MMC, SPI, UART/USART, USB OTG |
Supply Current-Max |
81mA |
Bit Size |
32 |
Data Converter |
A/D 24x12b; D/A 2x12b |
Watchdog Timer |
Yes |
Has ADC |
YES |
DMA Channels |
YES |
Data Bus Width |
32b |
PWM Channels |
YES |
Number of Timers/Counters |
14 |
Address Bus Width |
24 |
ROM (words) |
1048576 |
Core Architecture |
ARM |
On Chip Program ROM Width |
8 |
CPU Family |
CORTEX-M3 |
Length |
20mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
STM32F205ZGT6W Overview
For space savings, it is available in the 144-LQFP package. Using Surface Mount, it is mounted. A package of Tray contains it. A ARM? Cortex?-M3 core processor powers the device. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. 114 I/Os can be found on it. A component with the same part number as STM32F205 can be compared to other similar components. The position of the device is QUAD at terminal. Currently, it consists of 144 terminationals. It is a member of the STM32F2 series of electrical components. Because the supply voltage is 3.3V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 144 pins are used to construct it. This component is a part of Microcontrollers. Memory size for the devices is 1MB, which can be used to store programs and data. ARM is its core architecture. It is important to note that the maximum supply current is 81mA. There is a source of power of 2/3.3V that powers this device. It is highly efficient when it works at a frequency of 120MHz. There are currently 14 timers/counters set up on the system. This part is part of the CORTEX-M3 family of CPUs. For normal operation, the supply voltage (Vsup) should be kept above 1.8V. The oscillator type Internal is used to operate the device.
STM32F205ZGT6W Features
144-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
STM32F205ZGT6W Applications
There are a lot of STMicroelectronics STM32F205ZGT6W Microcontroller applications.
- Tape drives
- Vacuum cleaners
- Automatic staplers
- Home video and audio
- Oscilloscopes
- Fire alarms
- 3D printers
- Scanners
- Projectors
- Smoke alarms