STM32F207IGH6TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 201-UFBGA |
| Number of Pins | 201 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | STM32F2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Max Power Dissipation | 513mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Terminal Pitch | 0.65mm |
| Frequency | 120MHz |
| Base Part Number | STM32F207 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.6V |
| Interface | CAN, Ethernet, I2C, I2S, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 1MB |
| Oscillator Type | Internal |
| Number of I/O | 140 |
| RAM Size | 132K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 1MB 1M x 8 |
| Connectivity | CANbus, Ethernet, I2C, IrDA, LINbus, Memory Card, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 24x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 14 |
| Core Architecture | ARM |
| Low Power Mode | YES |
| Number of UART Channels | 2 |
| Number of ADC Channels | 24 |
| Number of Serial I/Os | 6 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 3 |
| Number of Ethernet Channels | 1 |
| Height | 500μm |
| Length | 10.05mm |
| Width | 10.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
STM32F207IGH6TR Overview
There is a 201-UFBGA package available to save space. The way of Surface Mount is used to mount it. Tape & Reel (TR) is the package that contains it. Devices with ARM? Cortex?-M3 core processors are available. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. 140 I/Os are present on the device. A component with the same part number as STM32F207 can be compared to other similar components. The position of the device is BOTTOM at terminal. There are a total of 176 terminations in it. In the STM32F2 series, this electrical component is found. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 201 pins are used. The mounting of this device is carried out following the method of Surface Mount. Total number of pins is 176. In order to store data and programs, the devices have a memory size of 1MB. The core architecture of the system is ARM. Using a frequency of 120MHz, it is very efficient. While deploying 3.6V, designers will be able to fully take advantage of its adaptability. In total, there are 14 timers and counters. It works with an oscillator type Internal.
STM32F207IGH6TR Features
201-UFBGA package
Mounting type of Surface Mount
STM32F207IGH6TR Applications
There are a lot of STMicroelectronics STM32F207IGH6TR Microcontroller applications.
- Paper shredders
- Radio
- PDAs, game consoles
- Automatic staplers
- Fire detection & safety devices
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Projectors
- DCS control intelligent sensor
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Data acquisition and control
