STM32F207IGT6
| Parameters | |
|---|---|
| Number of Timers/Counters | 14 |
| Core Architecture | ARM |
| Number of Programmable I/O | 24 |
| Number of UART Channels | 2 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 3 |
| Number of Ethernet Channels | 1 |
| Height | 1.45mm |
| Length | 24.1mm |
| Width | 24.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Surface Mount | YES |
| Number of Pins | 176 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F2 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 526mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 120MHz |
| Base Part Number | STM32F207 |
| Pin Count | 176 |
| Interface | CAN, Ethernet, I2C, I2S, IrDA, LIN, MMC, SDIO, SPI, UART, USART, USB |
| Memory Size | 1MB |
| Oscillator Type | Internal |
| Number of I/O | 140 |
| RAM Size | 132K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 1MB 1M x 8 |
| Connectivity | CANbus, Ethernet, I2C, IrDA, LINbus, Memory Card, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 24x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| DAC Channels | YES |
STM32F207IGT6 Description
The STM32F20x series is based on a high-performance ARM Cortex - M3 32-bit RISC kernel that runs at up to 120 MHz. The series integrates high-speed embedded memory (flash memory up to 1 MB, system SRAM up to 128K bytes), backup SRAM up to 4K bytes, as well as various enhanced I AHB O and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix. These devices are also equipped with adaptive real-time memory accelerators (ART Accelerators), which allow performance equivalent to executing 0-wait-state programs from flash memory at CPU frequencies up to 120 MHz. This performance has been validated using the CoreMark benchmark.
STM32F207IGT6 Features
· Core: Arm? 32-bit Cortex?-M3 CPU (120 MHz
max) with Adaptive real-time accelerator (ART
Accelerator?) allowing 0-wait state execution
performance from Flash memory, MPU,
150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
· Memories
– Up to 1 Mbyte of Flash memory
– 512 bytes of OTP memory
– Up to 128 + 4 Kbytes of SRAM
– Flexible static memory controller that
supports Compact Flash, SRAM, PSRAM,
NOR and NAND memories
– LCD parallel interface, 8080/6800 modes
· Clock, reset and supply management
– From 1.8 to 3.6 V application supply + I/Os
– POR, PDR, PVD and BOR
– 4 to 26 MHz crystal oscillator
– Internal 16 MHz factory-trimmed RC
– 32 kHz oscillator for RTC with calibration
– Internal 32 kHz RC with calibration
· Low-power modes
– Sleep, Stop and Standby modes
– VBAT supply for RTC, 20 × 32 bit backup
registers, and optional 4 Kbytes backup
SRAM
· 3 × 12-bit, 0.5 μs ADCs with up to 24 channels
and up to 6 MSPS in triple interleaved mode
· 2 × 12-bit D/A converters
· General-purpose DMA: 16-stream controller
with centralized FIFOs and burst support
· Up to 17 timers
– Up to twelve 16-bit and two 32-bit timers,
up to 120 MHz, each with up to four
IC/OC/PWM or pulse counter and
quadrature (incremental) encoder input
· Debug mode: Serial wire debug (SWD), JTAG,
and Cortex?-M3 Embedded Trace Macrocell?
STM32F207IGT6 Applications
Motor drive and application control
· Medical equipment
· Industrial applications: PLC, inverters, circuit breakers
· Printers, and scanners
· Alarm systems, video intercom, and HVAC
· Home audio appliances
