STM32F207VGT6TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | STM32F2 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 120MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STM32F207 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Interface | CAN, Ethernet, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 1MB |
| Oscillator Type | Internal |
| Number of I/O | 82 |
| RAM Size | 132K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 1MB 1M x 8 |
| Connectivity | CANbus, Ethernet, I2C, IrDA, LINbus, Memory Card, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 14 |
| Core Architecture | ARM |
| Low Power Mode | YES |
| Number of ADC Channels | 16 |
| Number of Serial I/Os | 6 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 3 |
| Number of Ethernet Channels | 1 |
| Height | 1.45mm |
| Length | 14.2mm |
| Width | 14.2mm |
| RoHS Status | ROHS3 Compliant |
STM32F207VGT6TR Overview
Due to its space-saving qualities, it is available in the 100-LQFP package. Surface Mount is the way to mount it. It comes in the package?of a Tape & Reel (TR). ARM? Cortex?-M3 core processor is present on the device. Working at -40°C~85°C TA temperature is recommended. It has a type of program memory of FLASH. 82 I/Os have been provided by the device. Based on the STM32F207 base part number, it can be compared with other components. A QUAD position is assigned to its terminals. A 100 termination is contained within it. STM32F2 is the series number of this electrical component. Because of the 3.3V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. It is constructed using 100 pins. A total of 100 pins are attached to it. In order to store data and programs, the devices have a memory size of 1MB. There is ARM core architecture for this system. This device works well at 120MHz frequency when it is operating at a high rate of efficiency. A total of 14 timers/counters are present. An oscillator of type Internal is used.
STM32F207VGT6TR Features
100-LQFP package
Mounting type of Surface Mount
STM32F207VGT6TR Applications
There are a lot of STMicroelectronics STM32F207VGT6TR Microcontroller applications.
- Light sensing & controlling devices
- Speed meter
- Microwave ovens
- Mobile computers
- Binding machines
- Oscilloscopes
- Security systems
- Hand-held metering systems
- Toasters
- Smart highways (navigation, traffic control, information monitoring and car service)
