STM32F215ZET6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F2 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Frequency | 120MHz |
| Base Part Number | STM32F215 |
| Pin Count | 144 |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | CAN, I2C, I2S, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 114 |
| RAM Size | 132K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, MMC, SPI, UART/USART, USB OTG |
| Supply Current-Max | 81mA |
| Bit Size | 32 |
| Data Converter | A/D 24x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 14 |
| Core Architecture | ARM |
| Number of UART Channels | 2 |
| Number of ADC Channels | 24 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 3 |
| Height | 1.45mm |
| Length | 20.2mm |
| Width | 20.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F215ZET6 Description
The high-performance ARM?Cortex?-M3 32-bit RISC core that runs at a frequency of up to 120 MHz is the foundation of the STM32F21x family. The family has a wide range of upgraded I/Os and peripherals connected to two APB buses, three AHB buses, and a 32-bit multi-AHB bus matrix, along with high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM, up to 4 Kbytes of backup SRAM).
The devices additionally include an adaptive real-time memory accelerator (ART AcceleratorTM), which enables program execution from Flash memory with performance similar to zero wait states at CPU frequencies up to 120 MHz. The CoreMark? benchmark has been used to certify this performance. STM32F215ZET6 features two general-purpose 32-bit timers, three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers, and two PWM timers for motor control. a real random number generator (RNG). They also have both conventional and cutting-edge communication interfaces. An SDIO, an improved flexible static memory control (FSMC) interface (for products provided in packages of 100 pins and more), a cryptographic acceleration cell, and a camera interface for CMOS sensors are examples of new sophisticated peripherals. Standard peripherals are also included with the devices.
STM32F215ZET6 Features
2 × 12-bit D/A converters
3 × 12-bit, 0.5 μs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode
General-purpose DMA: 16-stream controller with centralized FIFOs and burst support
Debug mode: Serial wire debug (SWD), JTAG, and Cortex?-M3 Embedded Trace Macrocell?
Core: ARM? 32-bit Cortex?-M3 CPU (120 MHz max) with Adaptive real-time accelerator (ART Accelerator?) allowing 0-wait state execution performance from Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
STM32F215ZET6 Applications
Automotive
Personal electronics
Communications equipment
