STM32F302R6T6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 444mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 72MHz |
| Base Part Number | STM32F302 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | CAN, I2C, I2S, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 51 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 50mA |
| Bit Size | 32 |
| Data Converter | A/D 15x12b; D/A 1x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 7 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| CPU Family | CORTEX-M4F |
| Number of ADC Channels | 15 |
| Length | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
STM32F302R6T6 Description
The high-performance Arm? Cortex?-M4 32-bit RISC core of the STM32F302x6/8 series is based on a frequency of up to 72 MHz and incorporates a floating point unit (FPU). The series has numerous upgraded I/Os and peripherals coupled to two APB buses, high-speed embedded memories (up to 64 Kbytes of Flash memory and 16 Kbytes of SRAM), and two APB buses.
In addition to a quick 12-bit ADC (5 Msps), three comparators, an operational amplifier, up to 18 capacitive sensing channels, one DAC channel, a low-power RTC, one general-purpose 32-bit timer, one timer for motor control, up to three general-purpose 16-bit timers, and one timer to drive the DAC, the devices offer a fast 12-bit ADC. Additionally, they have a variety of advanced and conventional communication interfaces, including a CAN device, an infrared transmitter, three I2Cs, up to three USARTs, up to two SPIs, and multiplexed full-duplex I2S.
STM32F302R6T6 Features
Temperature sensor
1 x 12-bit DAC channel with analog supply from 2.4 to 3.6 V
Three fast rail-to-rail analog comparators with analog supply from 2.0 to 3.6 V
1 x operational amplifier that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V
Up to 51 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant
Interconnect matrix
7 channel DMA controller supporting timers, ADCs, SPIs, I2Cs, USARTs and DAC
CRC calculation unit
Reset and power management
Serial wire debug (SWD), JTAG
96 bit unique ID
STM32F302R6T6 Applications
Power Management
Consumer Electronics
Portable Devices
Industrial
