STM32F303RBT6TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | STM32F3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 72MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STM32F303 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 22x12b; D/A 2x12b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 131072 |
| On Chip Program ROM Width | 8 |
| CPU Family | CORTEX-M4F |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
STM32F303RBT6TR Description
The high-performance Arm? Cortex?-M4 32-bit RISC core used in the STM32F303xB/STM32F303xC family has a floating point unit (FPU), a memory protection unit (MPU), and an embedded trace macrocell (ETM). The series features a wide variety of upgraded I/Os and peripherals coupled to two APB buses, high-speed embedded memories (up to 256 Kbytes of Flash memory and up to 40 Kbytes of SRAM), and two APB buses.
Up to four fast 12-bit ADCs (5 Msps) are available, along with up to seven comparators, four operational amplifiers, up to two DAC channels, a low-power RTC, up to five general-purpose 16-bit timers, one general-purpose 32-bit timer, and up to two timers for motor control. Additionally, they have up to two I2Cs, three SPIs (two of which are multiplexed full-duplex I2Ss), three USARTs, up to two UARTs, CAN, and USB as standard and advanced communication interfaces. The I2S peripherals can be clocked using an external PLL to ensure audio class precision.
STM32F303RBT6TR Features
Seven fast rail-to-rail analog comparators with analog supply from 2 to 3.6 V
Four operational amplifiers that can be used in PGA mode, all terminals accessible with analog supply from 2.4 to 3.6 V
Up to 24 capacitive sensing channels supporting touchkey, linear and rotary touch sensors
Up to 13 timers
Calendar RTC with Alarm, periodic wakeup from Stop/Standby
Communication interfaces
STM32F303RBT6TR Applications
Power Management
Consumer Electronics
Portable Devices
Industrial
