banner_page

STM32F303RET6

512KB 512K x 8 FLASH ARM? Cortex?-M4 32-Bit Microcontroller STM32F3 Series STM32F303 64 Pin 72MHz 64-LQFP


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-STM32F303RET6
  • Package: 64-LQFP
  • Datasheet: PDF
  • Stock: 530
  • Description: 512KB 512K x 8 FLASH ARM? Cortex?-M4 32-Bit Microcontroller STM32F3 Series STM32F303 64 Pin 72MHz 64-LQFP (Kg)

Details

Tags

Parameters
Subcategory Microcontrollers
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Terminal Pitch 0.5mm
Frequency 72MHz
Base Part Number STM32F303
Qualification Status Not Qualified
Interface CAN, I2C, I2S, IrDA, LIN, SPI, UART, USART, USB
Memory Size 512kB
Oscillator Type Internal
Number of I/O 51
RAM Size 80K x 8
Voltage - Supply (Vcc/Vdd) 2V~3.6V
Core Processor ARM® Cortex®-M4
Peripherals DMA, I2S, POR, PWM, WDT
Program Memory Type FLASH
Core Size 32-Bit
Program Memory Size 512KB 512K x 8
Connectivity CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB
Bit Size 32
Data Converter A/D 22x12b; D/A 2x12b
Data Bus Width 32b
Number of Timers/Counters 6
Core Architecture ARM
Number of A/D Converters 4
Number of UART Channels 2
Number of ADC Channels 22
Max Junction Temperature (Tj) 105°C
Number of PWM Channels 31
Number of I2C Channels 3
Ambient Temperature Range High 85°C
Number of USB Channels 1
Height 1.6mm
Length 10mm
Width 10mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 64-LQFP
Number of Pins 64
Weight 342.689036mg
Operating Temperature -40°C~85°C TA
Packaging Tray
Series STM32F3
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 64
STM32F303RET6 Description

The STM32F303RET6 is a 32-bit Microcontroller from the STM32 F3 series that includes the high-performance ARM Cortex-M4 RISC core with a floating point unit (FPU), high-speed embedded memories (Flash memory up to 512kB and 80kB of SRAM), and a wide range of enhanced I/Os and peripherals connected to two APB buses.
The STM32F303RET6 microcontroller includes fast 12-bit ADCs, seven comparators, four operational amplifiers, two DAC channels, ten general-purpose 16-bit timers, one general-purpose 32-bit timer, and standard and advanced communication interfaces, including three I2Cs, four SPIs, two I2Ss, three USARTs, two UART, a CAN, and a USB FS device.


STM32F303RET6 Features

CRC calculation unit
Power-on/Power-down reset (POR/PDR)
Programmable voltage detector (PVD)
Low-power modes - Sleep, stop, standby
VBAT supply for RTC and backup registers
4 to 32MHz Crystal oscillator
32kHz Oscillator for RTC with calibration
8MHz Internal RC with x 16 PLL option
40kHz Internal oscillator
Interconnect matrix
12-channel DMA Controller
2 x Watchdog timers (Independent and window)
SysTick Timer
Two 16-bit Basic timers to drive the DAC
Calendar RTC with alarm, periodic wakeup from Stop/Standby
CAN interface (2.0B Active)
USB 2.0 full speed interface
Infrared transmitter
Serial wire debug
96-bit Unique ID



STM32F303RET6 Applications

Data Acquisition
Low-cost Sensor integration
Low power Embedded devices.
Small data retention related purposes

Write a review

Note: HTML is not translated!
    Bad           Good