STM32F401VDT6
| Parameters | |
|---|---|
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Number of ADC Channels | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Max Power Dissipation | 465mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 84MHz |
| Base Part Number | STM32F401 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Interface | I2C, I2S, IrDA, LIN, SDIO, SPI, UART, USART, USB |
| Memory Size | 384kB |
| Oscillator Type | Internal |
| Number of I/O | 81 |
| RAM Size | 96K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.7V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 384KB 384K x 8 |
| Connectivity | I2C, IrDA, LINbus, SDIO, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
STM32F401VDT6 Overview
Due to its space-saving qualities, it is available in the 100-LQFP package. Surface Mount is the way to mount it. A package of Tray contains it. ARM? Cortex?-M4 core processor is present on the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. A total of 81 I/Os are present. Based on its base part number of STM32F401, other similarly-sized components can be found. The terminals of this device are set to QUAD. It consists of 100 terminationals. The STM32F4 series contains this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A number of 100 pins are used to construct it. A device with a memory size of 384kB can store programs and data. In terms of architecture, it is based on ARM. It performs extremely well at a frequency of 84MHz. A total of 8 timers/counters have been set up. Normal operation requires a supply voltage (Vsup) that is higher than 1.7V. An oscillator type Internal is required for it to work.
STM32F401VDT6 Features
100-LQFP package
Mounting type of Surface Mount
STM32F401VDT6 Applications
There are a lot of STMicroelectronics STM32F401VDT6 Microcontroller applications.
- Digital set-top boxes
- Switches
- X-ray
- Dryers
- Speed meter
- Gas monitoring systems
- Security systems
- Accu-check
- Medical instruments chromatographs
- Virtual reality VR robots
