STM32F411RCT6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Weight | 342.689036mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Max Power Dissipation | 313mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Base Part Number | STM32F411 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, I2S, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 50 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.7V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB OTG |
| Supply Current-Max | 34.5mA |
| Bit Size | 32 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| ROM (words) | 262144 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M4 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 16 |
| Number of External Interrupts | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F411RCT6 Overview
Due to its space-saving qualities, it is available in the 64-LQFP package. Surface Mount is the way to mount it. It is available in the Tray package. The device has a ARM? Cortex?-M4 core processor. Work should be performed at a temperature of -40°C~85°C TA. Its type of program memory is FLASH. A total of 50 I/Os are available on this device. Other components that are comparable to it have the base part number STM32F411. At QUAD, its terminals are located. 64 terminationals are present. The electrical component is part of the series STM32F4. Because the supply voltage is 3.3V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 64 pins are used to construct it. A method of mounting is used, which is Surface Mount. In the device, there is a memory capacity of 256kB which may be used to store programs and data. ARM forms the basis of its architecture. It is important to note that the maximum supply current is 34.5mA. It performs extremely well at a frequency of 100MHz. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. A total of 8 timers/counters are present. The part is a part of the CORTEX-M4 CPU family. An oscillator type Internal is required for it to work.
STM32F411RCT6 Features
64-LQFP package
Mounting type of Surface Mount
STM32F411RCT6 Applications
There are a lot of STMicroelectronics STM32F411RCT6 Microcontroller applications.
- Fire detection & safety devices
- DVD\DV\MP3 players
- Teletext terminals
- Electronic jamming systems
- Robotic prosthetic limbs
- Sonography (Ultrasound imaging)
- Heater/Fan
- Microwave ovens
- Electromechanical control
- Oscilloscopes
