Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 144-LQFP |
Number of Pins | 144 |
Operating Temperature | -40°C~85°C TA |
Packaging | Tray |
Series | STM32F7 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 144 |
Technology | CMOS |
Terminal Position | QUAD |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | NOT SPECIFIED |
Supply Voltage | 3.3V |
Terminal Pitch | 0.5mm |
Frequency | 216MHz |
Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
Base Part Number | STM32F746 |
Supply Voltage-Min (Vsup) | 1.7V |
Interface | CAN, EBI/EMI, Ethernet, I2C, IrDA, LIN, SD, SPI, UART, USART, USB |
Memory Size | 1MB |
Oscillator Type | Internal |
Number of I/O | 114 |
RAM Size | 320K x 8 |
Memory Type | FLASH, OTP |
Voltage - Supply (Vcc/Vdd) | 1.7V~3.6V |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
Core Processor | ARM® Cortex®-M7 |
Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
Program Memory Type | FLASH |
Core Size | 32-Bit |
Program Memory Size | 1MB 1M x 8 |
Connectivity | CANbus, EBI/EMI, Ethernet, I2C, IrDA, LINbus, SAI, SD, SPDIF-Rx, SPI, UART/USART, USB OTG |
Bit Size | 32 |
Data Converter | A/D 24x12b; D/A 2x12b |
Has ADC | YES |
DMA Channels | YES |
Data Rate | 480 Mbps |
Data Bus Width | 32b |
Number of Timers/Counters | 15 |
Core Architecture | ARM |
Number of ADC Channels | 24 |
Number of PWM Channels | 6 |
Number of USB Channels | 2 |
Height | 1.45mm |
Length | 20.2mm |
Width | 20.2mm |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The STM32F746ZGT6 is built around the high-performance ARM Cortex-M7 32-bit RISC processor, which operates at up to 216 MHz. The Cortex-M7 core has a single floating-point unit (SFPU) that supports all ARM single-precision data-processing instructions and data formats.
Core: ARM? 32-bit Cortex?-M7 CPU with FPU, adaptive real-time accelerator (ART Accelerator?) and L1-cache: 4KB data cache and 4KB instruction cache, allowing 0-wait state execution from embedded Flash memory and external memories, frequency up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
Memories
Dual-mode Quad-SPI
LCD parallel interface, 8080/6800 modes
LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator? for enhanced graphic content creation (DMA2D)
Clock, reset and supply management
Low-power
3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
2×12-bit D/A converters
Up to 18 timers: up to thirteen 16-bit (1x low power 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers run up to 216 MHz. 2x watchdogs, SysTick timer
General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
Debug mode
Up to 168 I/O ports with interrupt capability
Industrial, automotive and other high-end applications