STM32F769NIH6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 216-TFBGA |
| Surface Mount | YES |
| Number of Pins | 216 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F7 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 216 |
| Additional Feature | ALSO SUPPORTS MIPI-DSI, SPDIFRX RECEIVER INTERFACE |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 216MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STM32F769 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Interface | CAN, EBI/EMI, Ethernet, I2C, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB |
| Memory Size | 2MB |
| Oscillator Type | Internal |
| Number of I/O | 168 |
| RAM Size | 512K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.7V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M7 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 2MB 2M x 8 |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, IrDA, LINbus, MMC/SD/SDIO, QSPI, SAI, SPDIF, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 24x12b; D/A 2x12b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| Address Bus Width | 26 |
| ROM (words) | 2097152 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| External Data Bus Width | 32 |
| Height Seated (Max) | 1.1mm |
| Length | 13mm |
| Width | 13mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
Description
The STM32F769NIH6 is built around the high-performance Arm? Cortex?-M7 32-bit RISC CPU, which runs at up to 216 MHz. A floating-point unit (FPU) in the Cortex?-M7 core supports Arm? double-precision and single-precision data-processing instructions and data formats. It also includes a memory protection unit (MPU) and a full set of DSP commands to improve application security.
The STM32F769NIH6 device includes a high-speed embedded memory with up to 2 Mbytes of Flash memory, 512 Kbytes of SRAM (including 128 Kbytes of Data TCM RAM for critical real-time data), 16 Kbytes of instruction TCM RAM (for critical real-time routines), 4 Kbytes of backup SRAM available in low-power modes, with a large number of upgraded I/Os and peripherals connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix, and a multi-layer AXI interface that supports internal and external memory access.
Features
? Core: Arm? 32-bit Cortex?-M7 CPU with DPFPU, ART Accelerator? and L1-cache: 16 Kbytes I/D cache, allowing 0-wait state execution from embedded Flash and external memories, up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
? Memories
– Up to 2 Mbytes of Flash memory organized into two banks allowing read-while-write
– SRAM: 512 Kbytes (including 128 Kbytes of data TCM RAM for critical real-time data) + 16 Kbytes of instruction TCM RAM (for critical real-time routines) + 4 Kbytes of backup SRAM
– Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories
? Dual mode Quad-SPI
? 8- to 14-bit camera interface up to 54 Mbyte/s
? True random number generator
? CRC calculation unit
? RTC: subsecond accuracy, hardware calendar
? 96-bit unique ID
Applications
? Home audio appliances
? Mobile applications, Internet of Things
? Wearable devices: smartwatches
? Industrial applications: PLC, inverters, circuit breakers
? Printers, and scanners
? Alarm systems, video intercom, and HVAC
? Motor drive and application control
? Medical equipment
