Parameters | |
---|---|
Factory Lead Time | 1 Week |
Mounting Type | Surface Mount |
Package / Case | 208-LQFP |
Surface Mount | YES |
Operating Temperature | -40°C~85°C TA |
Packaging | Tray |
Series | STM32H7 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 208 |
Technology | CMOS |
Terminal Position | QUAD |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | NOT SPECIFIED |
Supply Voltage | 3.3V |
Terminal Pitch | 0.5mm |
Frequency | 400MHz |
Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
Base Part Number | STM32H750 |
Interface | CAN, Ethernet, I2C, I2S, IrDA, LIN, SMBus, SPI, UART, USART, USB |
Memory Size | 2MB |
Oscillator Type | Internal |
Number of I/O | 168 |
RAM Size | 1M x 8 |
Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
Core Processor | ARM® Cortex®-M7 |
Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
Program Memory Type | FLASH |
Core Size | 32-Bit |
Program Memory Size | 2MB 2M x 8 |
Connectivity | CANbus, EBI/EMI, Ethernet, I2C, IrDA, LINbus, MDIO, MMC/SD/SDIO, QSPI, SAI, SPDIF, SPI, SWPMI, UART/USART, USB OTG |
Bit Size | 32 |
Data Converter | A/D 36x16b; D/A 2x12b |
Has ADC | YES |
DMA Channels | YES |
Data Bus Width | 32b |
Number of Timers/Counters | 20 |
On Chip Program ROM Width | 8 |
Number of A/D Converters | 3 |
Number of UART Channels | 9 |
Number of ADC Channels | 36 |
Max Junction Temperature (Tj) | 125°C |
Number of PWM Channels | 8 |
Number of I2C Channels | 4 |
Ambient Temperature Range High | 85°C |
Number of SPI Channels | 6 |
Number of USB Channels | 2 |
Number of Ethernet Channels | 1 |
Height | 1.6mm |
RoHS Status | Non-RoHS Compliant |
The STM32H753xI device is based on a high-performance ARM Cortex - M7 32-bit RISC core and operates at up to 480 MHz. The Cortex - M7 kernel uses floating-point units (FPU) to support ARM double-precision (IEEE 754 compliant) and single-precision data processing instructions and data types. The STM32H753xI device supports a full set of DSP instructions and a memory protection unit (MPU) to enhance application security. The STM32H753xI device integrates high-speed embedded memory, 2 MB dual memory flash memory, up to 1 MB RAM (including 192 K bytes of MedicRAM, up to 864 K bytes of user SRAM, and 4K bytes of backup SRAM), and various enhanced AXI O and peripherals connected to the APB bus, AHB bus, 2x32 bit multi-AHB bus matrix and multi-layer AXI interconnects that support internal and external memory access.
Core
? 32-bit Arm? Cortex?-M7 core with doubleprecision FPU and L1 cache: 16 Kbytes of data
and 16 Kbytes of instruction cache; frequency
up to 480 MHz, MPU, 1027 DMIPS/
2.14 DMIPS/MHz (Dhrystone 2.1), and DSP
instructions
Memories
? 2 Mbytes of Flash memory with read-whilewrite support
? 1 Mbyte of RAM: 192 Kbytes of TCM RAM (inc.
64 Kbytes of ITCM RAM + 128 Kbytes of
DTCM RAM for time critical routines),
864 Kbytes of user SRAM, and 4 Kbytes of
SRAM in Backup domain
? Dual mode Quad-SPI memory interface
running up to 133 MHz
? Flexible external memory controller with up to
32-bit data bus: SRAM, PSRAM,
SDRAM/LPSDR SDRAM, NOR/NAND Flash
memory clocked up to 100 MHz in
Synchronous mode
? CRC calculation unit
Security
? ROP, PC-ROP, active tamper, secure firmware
upgrade support, Secure access mode
General-purpose input/outputs
? Up to 168 I/O ports with interrupt capability
Reset and power management
? 3 separate power domains which can be
independently clock-gated or switched off:
– D1: high-performance capabilities
– D2: communication peripherals and timers
– D3: reset/clock control/power management
Motor drive and application control
? Medical equipment
? Industrial applications: PLC, inverters, circuit breakers
? Printers, and scanners
? Alarm systems, video intercom, and HVAC
? Home audio appliances
? Mobile applications, Internet of Things
? Wearable devices: smart watches