STM32L053C6T6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32L0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | 3A991.A.2 |
| Max Power Dissipation | 363mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STM32L053 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, I2S, IrDA, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 37 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.65V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 32768 |
| Core Architecture | ARM |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32L053C6T6 Overview
There is an option to purchase it in the 48-LQFP package, which saves space. Surface Mount is the way to mount it. Package Tray contains it. Device with ARM? Cortex?-M0+ core processor issupported. Maintain a temperature of -40°C~85°C TA while working. The type of memory it uses is FLASH. There are 37 I/Os on it, which makes it a very simple device. A comparable component can be found by using the base part number STM32L053. At QUAD, its terminals are located. 48 terminationals are present. There are a number of electrical components in the STM32L0 series, including this one. Using the 3V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A number of 48 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. In order to store data and programs, the devices have a memory size of 32kB. Its core architecture is ARM. It is highly efficient when it works at a frequency of 32MHz. There are currently 5 timers/counters set up on the system. Normally, the supply voltage (Vsup) should remain above 1.8V. Using a Internal oscillator type, it works well.
STM32L053C6T6 Features
48-LQFP package
Mounting type of Surface Mount
STM32L053C6T6 Applications
There are a lot of STMicroelectronics STM32L053C6T6 Microcontroller applications.
- Walkie talkies
- Christmas lights
- Firewalls
- Broadband technology, video and voice processing
- Washing machine
- Traditional industrial transformation
- Volt meter
- Projectors
- Missile control
- Kindle
