STM32L053C6T7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Series | STM32L0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | 3A991.A.2 |
| Max Power Dissipation | 363mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STM32L053 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, I2S, IrDA, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 37 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.65V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 32768 |
| Core Architecture | ARM |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
STM32L053C6T7 Overview
As a result, it is available in the 48-LQFP package. The way of mounting it is Surface Mount. A package of Tray contains it. There is a ARM? Cortex?-M0+ as core processor in this device. In order to work effectively, the temperature should be kept at -40°C~105°C TA. FLASH has been assigned to it as a program memory. The device has 37 I/Os. A comparable component can be found by using the base part number STM32L053. The terminals of this device are set to QUAD. It has 48 terminationals. STM32L0 is the series number of this electrical component. Because of the 3V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 48 pins are required to construct this device. Data and programs can be stored on the devices with a memory size of 32kB. The architecture of its core is ARM. It performs extremely well at a frequency of 32MHz. 5 counters/timers are currently active. Normally, the supply voltage (Vsup) should remain above 1.8V. The oscillator type Internal is used to operate the device.
STM32L053C6T7 Features
48-LQFP package
Mounting type of Surface Mount
STM32L053C6T7 Applications
There are a lot of STMicroelectronics STM32L053C6T7 Microcontroller applications.
- Equipment control
- Food and beverage
- Switches
- Speed meter
- Automatic control
- Glucose monitoring systems (for Type 1 Diabetes)
- Temperature sensing and controlling devices
- Scanners
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Measuring revolving objects
