STM32L072CZY6TR
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 49-UFBGA, WLCSP |
| Number of Pins | 49 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | STM32L0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 49 |
| Max Power Dissipation | 417mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STM32L072 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, I2S, SPI, UART, USART, USB |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 40 |
| RAM Size | 20K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.65V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 192KB 192K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 13x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 7 |
| ROM (words) | 196608 |
| Core Architecture | ARM |
| EEPROM Size | 6K x 8 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 0.585mm |
| Length | 3.294mm |
| Width | 3.258mm |
| REACH SVHC | No SVHC |
STM32L072CZY6TR Overview
STM32L072CZY6TR microcontroller features the highest performance and offer a broad selection of upgraded connectivity and inputs. STM32L072CZY6TR datasheet is an excellent option for a variety of smaller and medium-sized tasks and full platform solutions. STMicroelectronics STM32L072CZY6TR is suitable for Motor drive, Medical equipment, Industrial applications, Printers, and scanners, Alarm systems, and Home audio appliances.
For space savings, it is available in the 49-UFBGA, WLCSP package.The way of mounting it is Surface Mount.It is available in the Tape & Reel (TR) package.The device runs in ARM? Cortex?-M0+ core processor.Work should be performed at a temperature of -40°C~85°C TA.In terms of its program memory type, it is FLASH.40 I/Os can be found on it.It has a base part number of STM32L072 that can be used to find other components that are comparable.The position of the device is BOTTOM at terminal.As far as terminations are concerned, there are 49 terminations present.In the STM32L0 series, this electrical component is found.Because the supply voltage is 3V, high efficiency can be achieved.It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC.There are 49 pins used in the construction of this device.During the mounting process, the device is mounted based on the Surface Mount method.Memory size for the devices is 24kB, which can be used to store programs and data.The core architecture of the system is ARM.This device achieves excellent efficiency at frequencies of 32MHz.7 counters/timers are currently active.Normal operation requires a supply voltage (Vsup) that is higher than 1.8V.Using oscillator type Internal makes it work.
STM32L072CZY6TR Features
49-UFBGA, WLCSP package
Mounting type of Surface Mount
STM32L072CZY6TR Applications
There are a lot of STMicroelectronics STM32L072CZY6TR Microcontroller applications.
Volt meter
Kindle
Fabric
Digital TVs
Fax machines
Microwave ovens
Virtual reality VR robots
Industrial robot
Smart instruments
Projector
