STM32L151CCU6TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-UFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | STM32L1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STM32L151 |
| JESD-30 Code | S-XQCC-N48 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, I2S, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 37 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 12.3mA |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 9 |
| ROM (words) | 262144 |
| Core Architecture | ARM |
| EEPROM Size | 8K x 8 |
| On Chip Program ROM Width | 8 |
| CPU Family | CORTEX-M3 |
| Height Seated (Max) | 0.65mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
STM32L151CCU6TR Overview
There is an option to purchase it in the 48-UFQFN Exposed Pad package, which saves space. The way of Surface Mount is used to mount it. It is available in the Tape & Reel (TR) package. ARM? Cortex?-M3 core processor is present on the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 37 I/Os are available on this device. Based on the STM32L151 base part number, it can be compared with other components. At QUAD, its terminals are located. 48 terminationals are present. The STM32L1 series contains this electrical component. The 3V supply voltage enables high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. The component is included in Microcontrollers. Using the devices' 256kB memory size, you can store programs and data. There is ARM core architecture for this system. 12.3mA is the maximum supply current. There is a source of power of 2/3.3V that powers this device. It is highly efficient when it works at a frequency of 32MHz. The number of timers and counters is 9. CORTEX-M3 CPUs are included in this part. For normal operation, the supply voltage (Vsup) should be kept above 1.8V. Using an oscillator type Internal, it operates.
STM32L151CCU6TR Features
48-UFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
STM32L151CCU6TR Applications
There are a lot of STMicroelectronics STM32L151CCU6TR Microcontroller applications.
- Electromechanical control
- Dishwashers
- Teletext terminals
- Broadband technology, video and voice processing
- Coffee machines
- Medical instruments chromatographs
- Air fryers
- Accu-check
- Smartphone
- Fax machines
