Parameters |
Mounting Type |
Surface Mount |
Package / Case |
100-LQFP |
Number of Pins |
144 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tray |
Series |
STM32L1 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
144 |
Subcategory |
Microcontrollers |
Max Power Dissipation |
290mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Supply Voltage |
3V |
Terminal Pitch |
0.5mm |
Frequency |
32MHz |
Base Part Number |
STM32L151 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2/3.3V |
Supply Voltage-Min (Vsup) |
1.8V |
Interface |
I2C, I2S, IrDA, LIN, SPI, UART, USART, USB |
Memory Size |
256kB |
Oscillator Type |
Internal |
Number of I/O |
115 |
RAM Size |
32K x 8 |
Voltage - Supply (Vcc/Vdd) |
1.8V~3.6V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER, RISC |
Core Processor |
ARM® Cortex®-M3 |
Peripherals |
Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
Program Memory Type |
FLASH |
Core Size |
32-Bit |
Program Memory Size |
256KB 256K x 8 |
Connectivity |
I2C, IrDA, LINbus, SPI, UART/USART, USB |
Supply Current-Max |
12.3mA |
Bit Size |
32 |
Data Converter |
A/D 40x12b; D/A 2x12b |
Watchdog Timer |
Yes |
Has ADC |
YES |
DMA Channels |
YES |
Data Bus Width |
32b |
PWM Channels |
YES |
DAC Channels |
YES |
Number of Timers/Counters |
9 |
Core Architecture |
ARM |
EEPROM Size |
8K x 8 |
On Chip Program ROM Width |
8 |
CPU Family |
CORTEX-M3 |
Height Seated (Max) |
1.6mm |
Length |
20mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
Mount |
Surface Mount |
STM32L151ZCT6 Overview
Due to the benefits of saving space, it is available in the 100-LQFP package. This is mounted using the Surface Mount method. This item can be found in package Tray. Devices with ARM? Cortex?-M3 core processors are available. Work should be performed at a temperature of -40°C~85°C TA. The type of memory it uses is FLASH. There are 115 I/Os on it. Other components that are comparable to it have the base part number STM32L151. At QUAD, its terminals are located. It has 144 terminationals. STM32L1 is the series number of this electrical component. Because of the 3V voltage of the supply, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 144 pins are used in its construction. Based on the Surface Mount method, it is mounted. The component is included in Microcontrollers. Memory size for the devices is 256kB, which can be used to store programs and data. The architecture of its core is ARM. Supply current is maximum at 12.3mA. A 2/3.3V source of power is being used to run it. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. There are currently 9 timers/counters set up on the system. This part is part of the CORTEX-M3 family of CPUs. Vsup should be kept above 1.8V for normal operation. The oscillator type Internal is used to operate the device.
STM32L151ZCT6 Features
100-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
STM32L151ZCT6 Applications
There are a lot of STMicroelectronics STM32L151ZCT6 Microcontroller applications.
- Xbox
- Paper shredders
- Electrocardiogram (EKG)
- Answering machines
- Vacuum cleaners
- Digital TVs
- Sonography (Ultrasound imaging)
- Calculator
- Toys
- Fire alarms