STM32L486ZGT6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32L4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | 5A992.C |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STM32L486 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.71V |
| Interface | CAN, EBI/EMI, I2C, IrDA, LIN, MMC, SD, SPI, UART, USART, USB |
| Memory Size | 1MB |
| Oscillator Type | Internal |
| Number of I/O | 114 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.71V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, LCD, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 1MB 1M x 8 |
| Connectivity | CANbus, EBI/EMI, I2C, IrDA, LINbus, MMC/SD, QSPI, SAI, SPI, SWPMI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 24x12b; D/A 2x12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Rate | 5 Mbps |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 11 |
| Core Architecture | ARM |
| Number of ADC Channels | 24 |
| Height | 1.45mm |
| Length | 20.2mm |
| Width | 20.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32L486ZGT6 Overview
There is a 144-LQFP package available. A total of 114 I/Os are on the Microcontroller. The Microcontroller has a mounting type of Surface Mount, which indicates that it is mounted conveniently. This Microcontroller is based on a core called 32-Bit. The type of memory it uses for its program is FLASH. -40°C~85°C TA is the temperature range at which this Microcontroller operates. STM32L4-series components are electrical components. The electronic part has a program memory size of 1MB 1M x 8. A ARM? Cortex?-M4 Core processor is used to power the device. ICs for MICROCONTROLLER, RISC uPs/uCs/peripheral parts. During the manufacturing process, 144 terminations were applied to the IC chip. In addition, MCU chip comes with a 32-bit size. Microcontroller chip has outputs of 1.8V volts. DMA channels number YES. 1MB is the memory size of the part. Using the base part number STM32L486 MCU, you will be able to find alternatives for the part. It exhibits good efficiency when it operates at a frequency of 80MHz and it is able to operate at a high frequency. Devices work in YES PWM channels. On the chip, there are 144 pins that are accessible. The clock has 11 timers or counters on it. As a result of its ARM core architecture, it can be used in many applications. The device has a total of 24 ADC channels in total.
STM32L486ZGT6 Features
STM32L4 series
Base part number of STM32L486
144 Terminals
Based on the 32-Bit
Comes with 144 Pins
STM32L486ZGT6 Applications
There are a lot of STMicroelectronics STM32L486ZGT6 Microcontroller applications. STM32L486ZGT6 MCU is usually applied for Measurement and control field, Consumer electronics products, Network communication, mobile communication, Office automation equipment and computer peripherals, Industrial control Instrumentation and process control, Agriculture, transportation, Navigation control, Network application, Metering & measurement, Day to day life, Safety, Medical instruments and Automobile industry.
Equipment control
Accu-check
Ipod
Kindle
Security systems
Aerospace navigation systems
Glucose monitoring systems
Broadband technology
Digital set-top boxes
Blood pressure monitors
