Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-253-4, TO-253AA |
Number of Pins |
4 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
320mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.6V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
STM6315 |
Output |
Open Drain or Open Collector |
Pin Count |
4 |
Number of Outputs |
1 |
Output Voltage |
400mV |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
2μA |
Nominal Supply Current |
15μA |
Power Dissipation |
320mW |
Output Current |
20mA |
Max Supply Current |
15μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
2.93V |
Reset Timeout |
112ms Minimum |
Min Reset Threshold Voltage |
2.87V |
Max Reset Threshold Voltage |
2.98V |
Undervoltage Threshold |
2.87V |
Overvoltage Threshold |
2.98V |
Ambient Temperature Range High |
125°C |
Height |
1.12mm |
Length |
3.04mm |
Width |
1.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
STM6315SDW13F Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of TO-253-4, TO-253AA functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. In a 3.6V supply voltage, the power management conducts. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 4. There are 4 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 2μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to STM6315, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 15μA. The architecture of this IC power provides 1 outputs.
STM6315SDW13F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2μA operating supply current
STM6315SDW13F Applications
There are a lot of STMicroelectronics STM6315SDW13F Voltage Supervisors applications.
- DC stabilized power supply module
- Automotive power systems
- Refrigeration
- Rechargeable batteries
- Insulation fault location system
- Personal computers
- Medical-specific isolation transformer
- Precision measurement
- Kitchen appliances
- Battery-powered equipment