STM6322LWY6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM6322 |
| Output | Open Drain, Push-Pull |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 17μA |
| Nominal Supply Current | 17μA |
| Power Dissipation | 320mW |
| Max Supply Current | 17μA |
| Adjustable Threshold | NO |
| Accuracy | 2.5 % |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.561V |
| Max Reset Threshold Voltage | 4.699V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.561V |
| Overvoltage Threshold | 4.699V |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM6322LWY6F Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain, Push-Pull of output voltage. As far as the supply current of the power management is concerned, it is 17μA. For similar manage ics search of the manufacturer, you can always refer to STM6322, the base PMIC number. The maximum supply temperature is 17μA.
STM6322LWY6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
17μA operating supply current
STM6322LWY6F Applications
There are a lot of STMicroelectronics STM6322LWY6F Voltage Supervisors applications.
- Important electronics for automotive safety
- Smartphones
- Digitally controlled LDO regulators circuit
- Network equipment
- Electrical fire monitoring system
- Unattended substation automation
- Functional modules
- Precision measurement
- Dash board
- Power distribution systems of CCU
