STM6322MWY6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM6322 |
| Output | Open Drain, Push-Pull |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 17μA |
| Nominal Supply Current | 17μA |
| Power Dissipation | 320mW |
| Max Supply Current | 17μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.39V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.314V |
| Max Reset Threshold Voltage | 4.446V |
| Threshold Voltage | +4.39V |
| Undervoltage Threshold | 4.314V |
| Overvoltage Threshold | 4.446V |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM6322MWY6F Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 5. The pins of the power management system count 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. In order to maintain a stable supply current for the power management, 17μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to STM6322, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 17μA.
STM6322MWY6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
17μA operating supply current
STM6322MWY6F Applications
There are a lot of STMicroelectronics STM6322MWY6F Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- DVR
- Network equipment
- Display equipment
- Smart meter
- Rechargeable batteries
- Consumer electronics
- Electric heating appliances
- Refrigeration
- Functional modules
