STM6601AU2DDM6F
| Parameters | |
|---|---|
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Smart Reset™ |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | Smart ON/OFF Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | STM6601 |
| Output | Open Drain or Open Collector |
| Pin Count | 12 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 6μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.5V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 240ms Minimum |
| Supply Current-Max (Isup) | 0.008mA |
| Undervoltage Threshold | 3.39V |
| Overvoltage Threshold | 3.61V |
| Height | 730μm |
| Length | 3mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN |
STM6601AU2DDM6F Overview
It is mounted through 12 terminals on the power management. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for 12-WFDFN functions. As with other Smart ON/OFF Controller products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 2V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 12 pins on power management. This power management system has 12 pins. IC management can only work with a supply voltage of 1.65V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 6μA. If you want to search for similar IC managements of this manufacturer, you can always refer to STM6601, which is the base power ics number. The IC power comes from the well-known Smart Reset? series.
STM6601AU2DDM6F Features
Smart ON/OFF Controller type
Minimum supply voltage of 1.65V
6μA operating supply current
STM6601AU2DDM6F Applications
There are a lot of STMicroelectronics STM6601AU2DDM6F Voltage Supervisors applications.
- FPGA design
- Display equipment
- Power communication system
- Satellite navigation
- Power distribution systems of infant care room
- Digitally controlled LDO regulators circuit
- Stable power system
- Military communications
- Transformer load monitoring equipment
- Military electronics
