STM6718SFWY6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 654mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM6718 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 35μA |
| Nominal Supply Current | 35μA |
| Power Dissipation | 654mW |
| Max Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.05V 2.925V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 1.02V |
| Overvoltage Threshold | 1.08V |
| Width | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM6718SFWY6F Overview
It is mounted through 5 terminals on the power management. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 2. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. The pins of the power management system count 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 35μA volt supply current. It is always advisable to use STM6718, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 35μA.
STM6718SFWY6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current
STM6718SFWY6F Applications
There are a lot of STMicroelectronics STM6718SFWY6F Voltage Supervisors applications.
- Efficient information transmission
- Linux and server computing
- Power distribution systems of ICU
- Battery-powered equipment
- Computer applications
- Transformer load monitoring equipment
- Data storage applications
- Smartphones
- Detection of phase sequence
- Radar
