STM6718SVWY6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 654mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM6718 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 35μA |
| Nominal Supply Current | 35μA |
| Power Dissipation | 654mW |
| Max Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.575V 2.925V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Width | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM6718SVWY6F Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. A supply voltage of 3.3V is used to conduct the PMIC chip. IC management conducts in a 2-voltage supply. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. 5 pins are present in total in this power management. There are 5 pins on the power managment ic. IC management can only work with a supply voltage of 800mV volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 35μA. For similar manage ics search of the manufacturer, you can always refer to STM6718, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 35μA.
STM6718SVWY6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current
STM6718SVWY6F Applications
There are a lot of STMicroelectronics STM6718SVWY6F Voltage Supervisors applications.
- Detection of phase sequence
- Transformer load monitoring equipment
- Detection of phase loss
- Battery cars
- Power distribution systems of operating room
- Microcontroller system
- Unattended substation automation
- Microprocessor system
- Leakage current detection
- Fire equipment power monitoring system
