banner_page

STM6719SFWB6R

3.3V6 Terminals 6-Pin STM6719 Voltage supervisor1 Channels Min 800mV Max 5.5V


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-STM6719SFWB6R
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 260
  • Description: 3.3V6 Terminals 6-Pin STM6719 Voltage supervisor1 Channels Min 800mV Max 5.5V (Kg)

Details

Tags

Parameters
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Type Multi-Voltage Supervisor
Additional Feature RESET THRESHOLD VOLTAGE ARE 2.925 AND 1.05 VOLTS
Max Power Dissipation 675mW
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.95mm
Base Part Number STM6719
Output Open Drain or Open Collector
Pin Count 6
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 800mV
Operating Supply Current 12μA
Nominal Supply Current 35μA
Power Dissipation 675mW
Max Supply Current 35μA
Adjustable Threshold YES
Watchdog Timer No
Reset Active Low
Voltage - Threshold 1.05V 2.925V Adj
Number of Voltages Monitored 3
Reset Timeout 140ms Minimum
Height Seated (Max) 1.45mm
Length 2.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-6
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Pbfree Code yes

STM6719SFWB6R Overview


This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. There are SOT-23-6 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. During operation, the power ic is supplied with a voltage of 3.3V. When 3 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. A total of 6 pins are located on this power management. 6 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 12μA. There are other features such as RESET THRESHOLD VOLTAGE ARE 2.925 AND 1.05 VOLTS to name a few. It is always advisable to use STM6719, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 35μA.

STM6719SFWB6R Features


Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
12μA operating supply current

STM6719SFWB6R Applications


There are a lot of STMicroelectronics STM6719SFWB6R Voltage Supervisors applications.

  • Power communication system
  • Low voltage/high power - AI, GPU
  • Electronics installed in the vehicle
  • Personal computers
  • Power distribution systems of operating room
  • Electrical fire monitoring system
  • WiFi router
  • Network equipment
  • Microprocessor system
  • Computer applications

Write a review

Note: HTML is not translated!
    Bad           Good