STM6719SYWB6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGES ARE 2.925V AND 2.188V; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 675mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM6719 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 35μA |
| Nominal Supply Current | 35μA |
| Power Dissipation | 675mW |
| Max Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.188V 2.925V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 2.125V |
| Overvoltage Threshold | 2.25V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM6719SYWB6F Overview
There are 6 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. Please find attached SOT-23-6 functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. The package peak reflow temperature is specified to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. There is a voltage supply of 3 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. 6 pins are present in total in this power management. 6 pins are on the supervisor. It is recommended that Vsup should not be less than 800mV for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a 35μA supply current present in the power management. The other features include, for example, [0], which is just one example. To find similar IC managements from the manufacturer, you can always search by STM6719. The maximum supply temperature voltage supervisor can handle is 35μA.
STM6719SYWB6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current
STM6719SYWB6F Applications
There are a lot of STMicroelectronics STM6719SYWB6F Voltage Supervisors applications.
- Medical-specific isolation transformer
- Urban rail transit weak current power monitoring
- Microcontroller system
- Automotive permanent magnet synchronous motors
- FPGA design
- Rechargeable batteries
- Household appliances
- Precision measurement
- Multi-voltage system
- emergency room
