Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
675mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
STM6719 |
Output |
Open Drain or Open Collector |
Pin Count |
6 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
800mV |
Operating Supply Current |
11μA |
Nominal Supply Current |
35μA |
Power Dissipation |
675mW |
Max Supply Current |
35μA |
Adjustable Threshold |
YES |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
2.313V 3.075V Adj |
Number of Voltages Monitored |
3 |
Reset Timeout |
140ms Minimum |
Undervoltage Threshold |
2.25V |
Overvoltage Threshold |
2.375V |
Height Seated (Max) |
1.45mm |
Length |
2.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
STM6719TZWB6F Overview
There are 6 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes SOT-23-6 functions for your convenience. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. In a 3.3V supply voltage, the power management conducts. In a 3 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 6 pins. 6 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The power management's supply current is 11μA. A similar IC managements number of the manufacturer can always be found by using STM6719, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 35μA.
STM6719TZWB6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
11μA operating supply current
STM6719TZWB6F Applications
There are a lot of STMicroelectronics STM6719TZWB6F Voltage Supervisors applications.
- Unattended substation automation
- Urban rail transit weak current power monitoring
- Telecommunications equipment
- Solar power charger
- Low voltage/high power - AI, GPU
- Magnetic resonance imaging
- Refrigeration
- Efficient information transmission
- WiFi router
- Data storage applications