STM6720SVWB6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGES ARE 2.925V AND 1.575V; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 675mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM6720 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 35μA |
| Nominal Supply Current | 35μA |
| Power Dissipation | 675mW |
| Max Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.575V 2.925V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM6720SVWB6F Overview
There are 6 terminals connected to this power management, which makes it easy to mount. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes SOT-23-6 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts at a voltage of 3.3V. During operation, the power ic is supplied with a voltage of 3. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 6. There are 6 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~85°C TA . As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 35μA. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using STM6720, the base power ics number. A maximum supply temperature of 35μA can be used with this power management.
STM6720SVWB6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current
STM6720SVWB6F Applications
There are a lot of STMicroelectronics STM6720SVWB6F Voltage Supervisors applications.
- Satellite navigation
- Important electronics for automotive protection
- Efficient information transmission
- Digitally controlled LDO regulators circuit
- Display equipment
- Microcontroller system
- Transformer load monitoring equipment
- Power communication system
- Functional modules
- Personal computers
