STM6720SYWB6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGES ARE 2.925V AND 2.188V; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 675mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM6720 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 35μA |
| Nominal Supply Current | 35μA |
| Power Dissipation | 675mW |
| Max Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.188V 2.925V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 2.125V |
| Overvoltage Threshold | 2.25V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM6720SYWB6F Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes SOT-23-6 functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 3.3V is used to conduct the PMIC chip. When 3 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 6. The pins of the power management system count 6. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 35μA volt supply current. The other features include, for example, [0], which is just one example. To find similar IC managements from the manufacturer, you can always search by STM6720. A maximum supply temperature of 35μA can be used.
STM6720SYWB6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current
STM6720SYWB6F Applications
There are a lot of STMicroelectronics STM6720SYWB6F Voltage Supervisors applications.
- Utility meter
- Important electronics for automotive safety
- Power communication system
- Smartphones
- DVR
- Detection of phase sequence
- Medical-specific insulation monitor
- Computer applications
- Rechargeable batteries
- DSP
