STM6777SVWB6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 675mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM6777 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 35μA |
| Nominal Supply Current | 35μA |
| Power Dissipation | 675mW |
| Max Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.575V 2.925V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Height Seated (Max) | 1.45mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM6777SVWB6F Overview
Power management is mounted through 6 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SOT-23-6 functions for your convenience. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.3V. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. A total of 6 pins are located on this power management. This power management system has 6 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The power management's supply current is 35μA. A similar IC managements number of the manufacturer can always be found by using STM6777, the base power ics number. The power management can work with a maximum supply temperature of 35μA.
STM6777SVWB6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current
STM6777SVWB6F Applications
There are a lot of STMicroelectronics STM6777SVWB6F Voltage Supervisors applications.
- Leakage current detection
- Power distribution systems of ICU
- Household appliances
- Military electronics
- Smart meter
- Medical-specific isolation transformer
- Leakage protection
- Precision measurement
- Magnetic resonance imaging
- Computer applications
