STM6777SYWB6F
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 675mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM6777 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 35μA |
| Nominal Supply Current | 35μA |
| Power Dissipation | 675mW |
| Max Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.188V 2.925V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 2.125V |
| Overvoltage Threshold | 2.25V |
| Height Seated (Max) | 1.45mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
STM6777SYWB6F Overview
There are 6 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are SOT-23-6 functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. When a supply voltage of 2 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. It has a total of 6 pins that are attached to IC management. 6 pins make up the power management. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The power management's supply current is 35μA. For similar manage ics search of the manufacturer, you can always refer to STM6777, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 35μA.
STM6777SYWB6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current
STM6777SYWB6F Applications
There are a lot of STMicroelectronics STM6777SYWB6F Voltage Supervisors applications.
- Computer applications
- Detection of phase imbalance
- Military communications
- Unattended substation automation
- Power distribution systems of ICU
- Data storage applications
- DC stabilized power supply module
- Electric heating appliances
- Battery-powered equipment
- Microcontroller system
