banner_page

STM6777TGWB6F

3.3V6 Terminals 6-Pin STM6777 Voltage supervisor1 Channels Min 800mV Max 5.5V


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-STM6777TGWB6F
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 644
  • Description: 3.3V6 Terminals 6-Pin STM6777 Voltage supervisor1 Channels Min 800mV Max 5.5V (Kg)

Details

Tags

Parameters
Undervoltage Threshold 1.08V
Overvoltage Threshold 1.14V
Height Seated (Max) 1.45mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-6
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Type Multi-Voltage Supervisor
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature RESET THRESHOLD VOLTAGES ARE 3.075V AND 1.110V; MANUAL RESET INPUT
Subcategory Power Management Circuits
Max Power Dissipation 675mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.95mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number STM6777
Output Open Drain or Open Collector
Pin Count 6
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 800mV
Operating Supply Current 35μA
Nominal Supply Current 35μA
Power Dissipation 675mW
Max Supply Current 35μA
Adjustable Threshold YES
Watchdog Timer No
Reset Active Low
Voltage - Threshold 1.11V 3.075V
Number of Voltages Monitored 2
Reset Timeout 140ms Minimum

STM6777TGWB6F Overview


Power management is mounted through 6 terminals. A Tape & Reel (TR) package is used to package the power management. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes SOT-23-6 functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. In a 2 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 6. This power management has 6 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. Supplied with a operating current of 35μA, this PMIC is capable of fully function as specified. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGES ARE 3.075V AND 1.110V; MANUAL RESET INPUT to name a few. It is always advisable to use STM6777, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 35μA can be used with this power management.

STM6777TGWB6F Features


Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current

STM6777TGWB6F Applications


There are a lot of STMicroelectronics STM6777TGWB6F Voltage Supervisors applications.

  • Important electronics for automotive protection
  • Radar
  • Analog circuit
  • Dash board
  • Display equipment
  • Multi-voltage system
  • Rechargeable batteries
  • Precision measurement
  • Telecommunications equipment
  • Urban rail transit weak current power monitoring

Write a review

Note: HTML is not translated!
    Bad           Good