STM6777TZWB6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 675mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM6777 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 35μA |
| Nominal Supply Current | 35μA |
| Power Dissipation | 675mW |
| Max Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.313V 3.075V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 2.375V |
| Height Seated (Max) | 1.45mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM6777TZWB6F Overview
It is mounted through 6 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached SOT-23-6 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 3.3V volt supply. Power management conducts at a voltage of 2. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. A total of 6 pins are located on this power management. 6 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. The supervisor's supply current is specified to 35μA. It is always advisable to use STM6777, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 35μA can be used with this power management.
STM6777TZWB6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current
STM6777TZWB6F Applications
There are a lot of STMicroelectronics STM6777TZWB6F Voltage Supervisors applications.
- Microprocessor system
- Network equipment
- Urban rail transit weak current power monitoring
- Leakage protection
- Electric heating appliances
- Telecommunications equipment
- Battery-powered equipment
- Battery cars
- Utility meter
- External alarm
